Painting a Body Kit, Is It Even Possible To DIY??

From the sounds of it, painting is best left to the pro’s, but I really don’t have a big buget (less than 200$) after buying the kit in the first place. Is it even possible to do it yourself and not turn out like crap?
I am a quick learner, and our gararge is practically a small wearhouse (Welder, Sand Blaster, Powder Coater, Air Tools, Ect.). Could I get a halfway decent spray gun and do it my self? If so, are there any COMPLETE guides?(The biggest problem I would have is how thick to apply the coats, and what grain sanding should be done where [1st, 2nd, and clear coats; before and after?])
So is it possible / practical (because of low buget)?

Kragen sells pre mixed auto paint for $20 a quart.
You can do it.
Sand it with 120 to get the rough spots out then follow up with 220. Use a block and not your hand.
Prime it and block out the primer
Spray it

Pro’skit Tool Centers

General Tools 840 Pro Doweling Kit $32.73 General Tools 840 Pro Doweling Kit The Pro Doweling Kit is a simple tool for making fast, accurate dowel holes in furniture and other carpentry projects. Just slide the jig over the wood surface and use the revolving turret to drill precise dowel holes. The Jig accepts 6 bit sizes and will fit boards up to 4” thick. In addition, this professional kit includes three brad point drill bits, as well as dowel pins and centers, drill stops, a hex wrench and carpenter’s glue. General Tools 840 Pro Doweling Kit Features: For end-to-end, edge-to-edge and edge-to-end doweling Unique revolving turret design is extremely accurate and simple to use Accepts 6 sizes of twist bits: 3/16”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2” Professional Kit includes the following accessories: 3 brad point drill bits: 1/4”, 5/16” and 3/8”, 30 dowel pins: 10 of each 1/4”, 5/16” and 3/8”, 3 drill stops: 1/4”, 5/16” and 3/8”, 6 dowel centers: 2 of each 1/4”, 5/16” and 3/8”, 1 hex wrench, Craft glue Guide bars are graduated for fast positioning of hole center For use on boards up to 4” thickness Rust resistant plated turret and parts Includes instruction booklet. Assures accurate line up of dowel holes in furniture and carpentry Revolving turret has six twist drill sizes Lift and turn turret to lock in guide hole Guide bars are graduated for fast positioning of hole center points Clamp screw locks tool onto work from 0″ to 4″ in width

TOOLS, PALADIN SEALTITE PRO CRIMPER $108.94 TOOLS, PALADIN SEALTITE PRO CRIMPER TOOLS, PALADIN SEALTITE PRO CRIMPER

Pro Detailers Kit $314.94 Pro Detailers Kit Professional Detailer KitSW84000 The perfect kit for the professional. All the washing, cleaning and drying tools you need. Kit includes: 5′-9′ telescoping Perfect Pole™, soft flagged brush, medium brush, soft washing tool, genuine sheepskin replacement bonnet, genuine sheepskin wash mitt, chenille micro fiber sponge, Aquazorber 2″ drying mop, AquaDry PVA cloth, 12″ Flexi-Gel hand held water blade, 14″ Quik Dry® water blade, Quik Dry® adapter, terry micro fiber 5 pk towels.

DAP 09125 DAP PRO CaulkTool Kit $11.18 DAP 09125 DAP PRO CaulkTool Kit DAP 09125 DAP PRO CaulkTool Kit Features: Caulk tool kit Creates a perfect looking seal every time while reducing wasted caulk or sealant Includes four tools that offer a variety of sealing edge sizes and shapes Also includes caulk removal tool Tools are easy to clean and can be used time and time again Use indoors or outdoors

Carpet Pro 7 Piece Deluxe Attachments Kit Set 5.119, 15′ Foot Hose, 3 Tools*, Brush, Wands for CarpetPro CPU Back Port, Riccar Simplicity Panasonic $39.95 Carpet Pro 7 Piece Deluxe Attachments Kit Set 5.119, 15′ Foot Hose, 3 Tools*, Brush, Wands for CarpetPro CPU Back Port, Riccar Simplicity Panasonic

Comments are closed